Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 13.501K SLD 3
MORE PAYLOAD THANKS TO INTELLIGENT LEIGHTWEIGHT DESIGN
- Shorter load cycle times due to High Speed Extention
- Maximum utilisation of the working range due to HPSC
- Higher payloads due to intelligent lightweight design
Brochures
PK 13.501K SLD 3 | PK 14.501K SLD 5
| Max. lifting moment | 13.2 |
| Max. lifting capacity | 6200 |
| Max. hydraulic outreach | 11.7 |
| Slewing angle | 420° |
| Slewing torque | 1.6 |
| Stabilizer spread (std) | 5.0 m |
| Fitting space required (std) | 0.74 |
| Width folded | 2.55 |
| Max. operating pressure | 330 |
| Pump capacity | 35 - 50 l/min |
| Dead weight (std.) | 1480 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Std | 13.2 mt | 5.2 m | 420 | 1.6 | 33.0 Mpa | 35-50 | 1480 kg | 2215 mm | 2550 mm | 740 mm | 5100 mm | - | 2600 kg |
| A | 13.2 mt | 7.3 m | 420 | 1.6 | 33.0 Mpa | 35-50 | 1630 kg | 2215 mm | 2550 mm | 740 mm | 7200 mm | - | 1740 kg |
| B | 12.6 mt | 9.5 m | 420 | 1.6 | 33.0 Mpa | 35-50 | 1750 kg | 2215 mm | 2550 mm | 740 mm | 9400 mm | - | 1240 kg |
| C | 12.3 mt | 11.7 m | 420 | 1.6 | 33.0 Mpa | 35-50 | 1860 mm | 2215 mm | 2550 mm | 740 mm | 11600 mm | - | 900 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
